• PRO/CAM SBC mechanical fuel pumps are constructed from billet aluminum for added strength and reliability
• 1/2" NPT inlet and outlet fittings, pumps 130 GPH
• Complete with gasket
• PRO/CAM pumps have a 4-month warranty from purchase date
**If using a fitting sealer, use liquid Teflon thread sealant and DO NOT use Teflon tape. Make sure to use quality, name brand, pipe thread fittings for proper performance**
Normal Operation Pressures:
PRC9351 - 7.5 PSI Pump (6-9 PSI) ***Recommended for Gas applications
PRC9350-1 - 11 PSI Pump (9-12 PSI) ***Recommended for Alcohol applications
PRC9350 - 15 PSI Pump (12-16 PSI) ***Recommended for Alcohol applications
Reclocking:
To reclock, completely seperate the pump into two parts by removing the bolts around the perimeter of the pump. Then rotate the pump body to desired location and reassemble. DO NOT twist or move the diaphragm or pump will not operate properly.
Installation:
To insure long life and leak proof service, tighten all exterior bolts & screws to 16-18 INCH LBS with loctite before installation. Overtightening of bolts will damage diaphragm & cause leaking
description for this product here...
